Marine Emissions Analysers P2000 In-Situ CEM In Focus
4
The Protea 2000 emissions monitoring system is approved for the analysis of exhaust gases from the engines and boilers of ships and offshore rigs. Robust and with proven reliability, up to six gases can be measured including SO2, CO2 and NOx.

The Protea 2000 emissions monitoring system comprises up to 8 exhaust mounted analysers, each with automatic verification facilities. Emissions data from the entire system is securely managed and displayed at a dedicated Classification Society approved panel PC, with outputs to networks, control systems, and reporting facilities.
The advanced Protea 2000 analyser utilises an in-situ (inside the exhaust) sample cell so avoiding the need to extract gas. Importantly this avoids the use of costly, high maintenance sample handling systems, and enables analysis of an unmodified, truly representative gas sample.
Exhaust gases from the combustion of residual and distillate fuels can be analysed, so that compliance can be confirmed in port, in Emissions Control Areas and in international waters. The Protea 2000 includes highly effective sintered filters that prevent the ingress of particulate matter into the sample gas cell and a heater to prevent condensation and deposits where the exhaust is below its dew point. Construction materials are ideally suited to the marine environment.The analyser will automatically range change (capable of multiple ranges) in the event of a non-operational Exhaust Gas Cleaning Systems. This also allows monitoring of higher levels of SO2 when the vessel is outside an ECA area but still subject to the higher global emission level.
The measurement range of Protea 2000 analysers is such that compliance can be confirmed even when regulated emissions are at a very low level. Emissions after an exhaust gas scrubber, that are the equivalent of 0.1% sulphur fuel, are readily measured. Protea 2000 analyser solutions can be fitted to all sizes of exhaust and ATEX/IEC approved options are available for use in the hazardous areas typically found in offshore and tanker applications.
The Protea marine CEMS has been designed for minimal intervention with a high availability, in addition the systems operate a comprehensive diagnostic routine. Enhanced Customer Support - Recent upgrades include our new Automatic Field Data Collection (AFDC) module that uniquely allows the ship's engineer to automatically run a routine collecting all the relevant data from the analyser under the various states of operation. This can then be e-mailed to Protea’s customer support team who will analyse and determine any remedial action required. Protea will upgrade existing Procal supplied CEMS saving the ships operator time and expenses and increasing emission data availability. For more information on the P2000 shipping and Marine emissions analyser please contact us at https://www.protea.ltd.uk/contact.
#protea #emissions #monitoring #cems #ftir #gas #analysers #shipping #marine
Other Articles
Scaling Up Carbon Dioxide Removals In The EU
28
The IMO Must Tighten Rules On Shipping Carbon Emissions
22
DNV Statement of Compliance Achieved
16
Protea Featured in Spring Edition of Clean Shipping International
15
Marine Scrubber Market To Reach 20 Billion US Dollars By 2031 With New Emission Rules
14
Protea Exhibits at Cem Middle East in Bahrain
09
Protea Attending CEM Middle East 2025 In Bahrain
08
Ankersmid M&C at M+R Antwerp
01
EU Maritime Shipping Emissions Continue To Rise Driven By LNG
31
Sales & Service Training & Sea Asia Expo 2025 – Singapore
31