The First P300 Extractive Gas Analyser Shipped
7
Protea has recently manufactured and shipped its very first P300 Extractive Gas Analyser. Monitoring percent levels of HCl, HF and SO2 the unit will monitor high levels of corrosive toxic gases in a hazardous area.
All sample “wetted” components are manufactured from Monel, the zero / calibration valves are pneumatically actuated. The sample cell has a purged containment element, if for any reason the window seals fail the process gas will be discharged to a safe vent. In the event of the pressure exceeding 6 bar(g) or a power failure the process sample gas is isolated and the cell purged with instrument air. The cell was pressure tested to 12Bar(g)
The Protea 300 is a multi-component configurable gas and liquid analyser certified for use in hazardous area. Applications in BioGas, Bio Methane, Natural Gas and many applications in refineries. More information on the P300 is found here www.protea.ltd.uk/p300-extractive-gas-analyser
Other Articles
LNG Retrofit Market Sees Revival Amid Regulatory Pressures
19
Approaches To Carbon Management & The UK Strategy
12
2025 Is a Crucial Year for Shipping Decarbonisation Post MEPC 83
06
Scaling Up Carbon Dioxide Removals In The EU
28
The IMO Must Tighten Rules On Shipping Carbon Emissions
22
DNV Statement of Compliance Achieved
16
Protea Featured in Spring Edition of Clean Shipping International
15
Marine Scrubber Market To Reach 20 Billion US Dollars By 2031 With New Emission Rules
14
Protea Exhibits at Cem Middle East in Bahrain
09
Protea Attending CEM Middle East 2025 In Bahrain
08