Protea News
1st October 2020 - Distributor Exhibition In Russia
One of our distributors in Russia, Rias Limited, recently exhibited at the "Gas. Oil. Technologies-2020" exhibition in the Russian city of Ufa which was supported by the National Association of Liquefied Natural Gas and the National Gas Engine Association.
Read More
29th September 2020 - Bridging the Gap, Mind Matters
During the current pandemic, peoples’ mental health has been under increasing strain. Protea Limited has been proud to support Bridging the Gap, Mind Matters - a Charity providing free of charge talking therapies combined with exercise therapy to anyone who needs it.
Read More
2nd September 2020 - Introducing BetaCap Capillary Gas Divider
Capillary technology offers an improvement in uncertainty of measurement of a gas dilution system over other technologies. The BetaCAP range of blenders offered by Protea has a set number of highly accurate capillaries – 30 or 60 as standard. The unit “switches” in the most suitable capillaries to generate the desired gas concentration, with fine-tuning of the gas delivery being made by pressure compensation.
Read More
10th August 2020 - Continued Service During Covid-19
During the global pandemic, Protea have demonstrated commitment to the continuation of service and support of our clients, in the UK and globally.
Read More
3rd August 2020 - Introducing the atmosCAL MFC Gas Divider
The accurate calibration of gas analysers is critical, during factory build, routine service but also for on-going field assessment of analyser performance. Protea has developed the atmosCAL Gas Blender to enable dilution of high concentration gas cylinders over lower concentration ranges, in order to calibrate gas analysers - allowing characteristics such as absolute reading, repeatability, reproducibility, linearity and response time to be tested on analysers.
Read More
20th July 2020 - Landfill Siloxanes Removal Monitoring
In partnership with Anka Enerji (Turkey), Protea’s atmosFIR Siloxanes gas analyser is being used to provide valuable on-site continuous siloxanes monitoring data in conjunction with siloxanes abatement plant. Using the powerful multigas analyser, all major siloxanes species can be detected and measured in a landfill or biogas background.
Read More
13th July 2020 - atmosDAHS - CEM Emissions Reporting Software – MCERTS Approved
The continuous logging, reporting and assessment of emissions data is required by plant operators to ensure compliance with permits and standards. Protea’s atmosFIR Continuous Emissions Monitoring (CEM) System is a complete online emissions monitoring solution and can now be supplied with built-in regulatory reporting software, without the need for any external hardware (PC’s or data-loggers).
Read More
13th July 2020 - New Website Launched For Twin Tek Singapore
As part of our global Emissions Monitoring Solutions, we have a number of close global partners servicing every continent and sector. We are pleased to present the new Marine Emissions website for Twin-Tek Singapore Pte Ltd, covering the territories of Singapore, China, Indonesia, Korea, Malaysia, Philippines, Japan, Thailand, Vietnam.
Read More
8th June 2020 - Introducing The Gas Divider Range
As Protea manufactures a range of IR, UV, FTIR and MS gas analysers, we have designed a range of calibration products to meet the needs of checking our analysers against a range of standards and procedures. This includes emissions testing standards for both fixed (CEMs) and portable gas analysers, as well as standards for specific analysis applications such as Fire Testing. Protea now provides Laboratory Gas Dividers, Field Gas Dividers and the full range of technologies with the full range being found here https://www.protea.ltd.uk/gas-divider.
Read More
6th May 2020 - WWEM and AQE 2020 - New Dates announced
With the uncertain nature of how COVID-19 will unfold over the coming months and listening to the government and health advisor’s warnings, there is a strong possibility that social distancing may be in place until the end of the year.
Read More
1st May 2020 - Marine Emissions from Protea
Protea’s new marine emissions website is launched today.
Read More
7th April 2020 - Developments in the CEMS market From Environmental Technology
Protea recently appeared in an online emissions magazine article at Environmental Technology authored by Marcus Pattison on behalf of CEM. He stated "From an environmental perspective, continuous monitoring provides a better picture of process emissions because it is able to detect spikes and trends, whilst also providing emissions data during all process conditions". The article covered topics such as the UK still applying EU regulations, Industrial Emissions Directive (IED), Medium Combustion Plant, Waste Incineration & CEMS Developments.
Read More
7th April 2020 - The Complete FTIR Gas Analyser Solution
Protea’s range of Fourier Transform Infrared (FTIR) Gas Analyser allows for the measurement of nearly any gas with one instrument. A FTIR gas analyser collects a full infrared spectrum continuously, allowing for hundreds of gases to be detected and measured at once. Changes are only needed to software calibration files to measure new gases. Protea offers the complete FTIR Gas Analyser solution for a global market place.
Read More
3rd April 2020 - Online FTIR & CEMS Solutions Offered
The current pandemic has seen an increased need for remote reporting and management of FTIR and CEMS solutions across the globe.
Read More
20th March 2020 - UPDATED Coronavirus / COVID-19 Statement 20/03/2020
Following the most recent advice from the Government, Protea have consulted with staff and have made provisions for them to work from home where possible for the foreseeable future. At the moment we expect minimal disruption to our day-to-day operations as a result of the changes. Manufacturing and service within our factories is continuing.
Read More
10th March 2020 - Global Marine Support Network Expanded
With our marine analysers installed on vessels all over the world, the ongoing service and support for the equipment is satisfied by our dedicated network working in and around major ports and installation locations. Visit www.protea.ltd.uk/marine-support-network for more information.
Read More
19th February 2020 - Protea Exhibiting at The Asia Pacific Maritime 30 Sep - 2 Oct 2020
New dates have been announced for the Asia Pacific Maritime 2020 exhibition. Protea Limited are exhibiting at the UK Pavilion Booth number E-K07. The Asia Pacific Maritime (APM) is a premier exhibition and conference in Asia showcasing a complete overview of the vessel sectors, services and solutions, technology, vessels equipment, machinery, supplies, and many more. With 15 editions of proven track record, APM gives you 3 days of opportunities to connect with decision makers and to sharpen industry understanding in Asia. Click here www.apmaritime.com for more information.
Read More
16th January 2020 - New Website Launched
We have recently launched our new website offering a wider range of applications and commercial solutions for emissions monitoring, management and reporting. Protea has been at the forefront of emissions monitoring systems for over 20 years, as both a manufacturer and a user of stack emissions equipment and we continue to provide products and services to a global customer base. The Marine Emissions section is also expanded to provide more information on solutions, products, services and approvals
Read More
3rd December 2019 - Season's Greetings From Protea
We would like to take this opportunity to say thank you to everyone involved with our company including customers, staff, suppliers and partners for your support during the year. We are looking forward to 2020 and working with all of you again next year. Season’s greetings from all of us and we wish you a Merry Christmas and a Happy New Year. Our last working day before Christmas will be Tuesday 24th December, We are open on Thursday 2nd January 2020.
Read More
7th November 2019 - Type Approval Certificate For Marine Automatic Devices & Equipment Japan
Protea has attained a further marine emissions approval accreditation to certify that the undernoted product (P2000) has been approved in accordance with the requirements specified in Chapter 1, Part 7 of 'Guidance for the Approval of Materials and Equipment for Marine Use' and the relevant Society's rules.
Read More
17th October 2019 - Protea Exhibiting at CEM India 2019 Conference & Exhibition on Emissions Monitoring
Protea exhibited at the Conference and Exhibition (CEM) on Emissions Monitoring India on 24th to 26th September 2019. Our stand was so busy with existing and new customers. Our Distributor ICE did a fantastic job and thank you to everyone involved and those who visited our stand.
Read More