Protea News
12th October 2021 - Protea Exhibiting At The AQE 2021 Virtual Event
The event will be held on Thursday 13 & Friday 14th October 2021. AQE is a focused meeting for Air Quality and Emission Monitoring professionals who are looking for the latest product solutions, technical advice, methods and applications to measure, test and analyse Air Quality and Emissions.
Read More
11th October 2021 - Differences between CEN/TS 17337:2019 and TGN M22 for Portable FTIR Emissions Testing
Protea and the National Physical Laboratory (NPL) have recently completed a Measurement 4 Recovery (M4R) project to produce an Industry Transition Document (ITD) that concisely lays out the changes required of stack testing organisations transitioning from TGN M22 to CEN/TS 17337.
Read More
8th October 2021 - GPS Enabled Gas Analysers
Protea’s range of FTIR, TDL and Mass Spectrometer gas analysers are now available with optional GPS module. For portable gas analysers used across various locations and sites, geotagging data can be a requirement of reporting. Protea’s FTIR gas analysers in particular now write the longitude and latitude of the location the spectrum was acquired to the spectrum file itself. This gives a permanent record of where the raw data was collected.
Read More
6th October 2021 - Customer and Distributor Support Portal
As a world leader in online gas analysers, support of our customers and Distributors around the globe is key. Protea now offers an online support Portal through our website giving end-user and our channel partners access to:
Read More
9th September 2021 - 18-20 June 2021 The 12th National Conference on Environmental Catalysis and Eco-Materials
In conjunction with our Chinese Distributor Beijing Leshi Tech, Protea attended the 12th National Conference on Environmental Catalysis and Eco-Materials after last years postponed event. Showcasing our range of FTIR, TDL and QMS gas analyser, the conference drew important visitors and customers from across China.
Read More
7th September 2021 - Applied Technologies Through Innovation
With over 20 years' experience of process and emissions measurements, Protea is a world leader in getting the most from a range of technologies and can measure any gas. With complimentary measurement technology and measurement automation, Protea can design and supply the complete solution. This section gives a brief introduction to the various technologies that Protea uses.
Read More
5th July 2021 - Global Distributor Network Across Six Continents
Protea operates across a global network of distributors and partners allowing for localised on the ground expertise. Our distribution network of partners have been using our products for over 25 years. Protea has the support system in place to deliver the correct solution for your application and to provide the support for many years to come.
Read More
7th June 2021 - The First P300 Extractive Gas Analyser Shipped
Protea has recently manufactured and shipped its very first P300 Extractive Gas Analyser. Monitoring percent levels of HCl, HF and SO2 the unit will monitor high levels of corrosive toxic gases in a hazardous area.
Read More
15th April 2021 - Multistream Gas Analysis Solutions From Protea
Protea’s FTIR, TDL and QMS analysers are available with measurement from multiple sample points using standard modular equipment for cost-effective bespoke solutions.
Read More
12th April 2021 - Emissions Sampling Equipment
As part of our delivery of portable or fixed emissions analysers, Protea will supply the most suitable sampling equipment for making accuracte, repeatable emissions. We can happily provide consultation and support in supplying you with sampling equipment for use with other emissions gas analysers.
Read More
18th March 2021 - Apprentice Recruitment Despite Pandemic
Despite the global downturn for some markets, Protea has seen growth in this 12-month period that the world has been impacted by Covid-19. So much so that we have committed to staff recruitment, including new apprenticeships.
Read More
16th March 2021 - Fast Scanning FTIR
Protea’s atmosFIR FTIR analyser range is now available with fast scanning operation. Fast scanning is standard, with no need for special hardware.
Read More
12th March 2021 - Emissions Reporting Software from Protea (DAHS)
Protea can provide software for regulatory emissions reporting, offering both our MCERTS certified QAL3 software, atmosDAHS, and non-certified comprehensive ProDAHS.
Read More
8th March 2021 - CEM Integration by Protea
Protea can quickly and cost-effectively provide gas analyser integration support for your project.
Read More
5th March 2021 - Emissions Analyser Software Features
Protea’s range of portable and fixed emissions gas analysers implement unique features to benefit emissions gas testing. Our PAS and PAS-Pro software offers the following features that make compliance with emissions testing standards easier as the software will dynamically calculate the required test results on-site:
Read More
2nd March 2021 - Combined FTIR + FID Analysers from Protea
atmosFID is a Flame Ionisation Detector (FID) analyser from Protea. atmosFID can be provided in fixed and portable applications to run alongside Protea’s multigas FTIR, atmosFIR. atmosFID and atmosFIR are both certified under EN 15267-3 and MCERTS for emissions monitoring (CEM) applications.
Read More
2nd February 2021 - Hazardous Area Gas Analysers For Zone 1 & 2
Protea can provide gas analysers for installation in Hazardous area - Zone 1 and Zone 2. Protea is certified as a manufacturer of ATEX equipment as per Directive 2014/34/EU. For installation of gas analysers in Hazardous area, Protea can provide fully certified analysers and systems. As a manufacturer accredited under Directive 2014/34/EU our P2000 and P300 in-situ and extractive IR gas analysers have a history of installation in applications such as refinery monitoring. The atmosFIR EX is a complete multi-gas FTIR analyser Zone 1 and Zone 2 approved installation, that can provide emissions or process measurements for multiple sample points. Protea can also provide Hazardous area sampling lines and probes to give a complete solution.
Read More
5th January 2021 - Operational Update for Coronavirus COVID 19 & Protea
We manufacture a range of extractive and in-situ analysers, applying the technologies of IR, FTIR, UV, TDL and Mass Spectrometry (QMS) in portable and fixed gas measurement systems. In particular, we are specialists in the design, manufacture and supply of Continuous Emission Monitoring (CEMS) and process analyser systems. We are open for business across all aspects of our products and services for our customers. All employees, contractors and suppliers are operating within hands, face and space guidelines allowing us to process enquiries and fulfil orders. We are available to process any requests so please contact us for more information.
Read More
2nd December 2020 - Seasons Greetings From Protea
Season’s greetings from all of us and we wish you a Merry Christmas and a Happy New Year. We are taking orders throughout December into 2021 and will be operational offering emissions monitoring systems and services as normal. Our last working day before Christmas will be Thursday 24th December 2020, reopening on Monday 4th January 2021. We would like to thank everyone involved with our company including our employees, customers, suppliers and people who have been involved in projects and related activities.
Read More
5th November 2020 - Flame Ionisation Detector (FID) Total VOC Launched
Protea’s Flame Ionisation Detector (FID) analysers allow for Total VOC analysis from a range of emissions, process, exhaust and ambient air applications. Protea’s Flame Ionisation Detector (FID) analysers are used to give quick, accurate measurement of Total VOC concentration in a range of applications such as emissions and process control and offer MCERTS EN 15267-3 QAL1 certification. Find out more at https://www.protea.ltd.uk/fid-total-voc
Read More
20th October 2020 - ISO 9001:2015 Certification Reissued
Protea is pleased to announce the successful re-certification of our Quality System under ISO 9001:2015. Protea’s scope covers the design, manufacture, supply and service of analysers for gas emissions, process control and research across our two UK factories.
Read More