WELCOME TO PROTEA LTD
8th June 2020 - Introducing The Gas Divider Range
As Protea manufactures a range of IR, UV, FTIR and MS gas analysers, we have designed a range of calibration products to meet the needs of checking our analysers against a range of standards and procedures. This includes emissions testing standards for both fixed (CEMs) and portable gas analysers, as well as standards for specific analysis applications such as Fire Testing. Protea now provides Laboratory Gas Dividers, Field Gas Dividers and the full range of technologies with the full range being found here https://www.protea.ltd.uk/gas-divider.
atmosCAL - Protea has developed the atmosCAL MFC Gas Divider to provide calibration gas linearity checks to our range of gas analysers. BetaCAP - Capillary technology offers an improvement in uncertainty of measurement of a gas dilution system over other technologies.Read More
6th May 2020 - WWEM and AQE 2020 - New Dates announced
With the uncertain nature of how COVID-19 will unfold over the coming months and listening to the government and health advisor’s warnings, there is a strong possibility that social distancing may be in place until the end of the year.
We pride ourselves in running successful events and the health, safety and welfare of all participants is our main priority.
Whilst the event is still over seven months away, we share the concerns that many of you have voiced regarding the feasibility of the exhibition proceeding as planned this November.
We have therefore taken the decision to postpone WWEM and AQE until the 25th and 26th May 2021.
We’ve secured new dates which avoid Bank Holidays, Easter and School Holidays. We want to minimise associated risk and cost to exhibitors and visitors which is why we have taken this decision as early as possible.
We will continue working on the technical program and will extend the deadline for the call for papers.
We look forward to delivering a highly successful event with the new dates in 2021.Read More
1st May 2020 - Marine Emissions from Protea
Protea’s new marine emissions website is launched today.
MD Andy Toy says “Our Marine Emissions brand demonstrates our growing capabilities in the marine sector, with the new website showcasing our type-approved emissions monitors and measurement capabilities that will support the ship and off-shore industries.”Read More
7th April 2020 - Developments in the CEMS market From Environmental Technology
Protea recently appeared in an online emissions magazine article at Environmental Technology authored by Marcus Pattison on behalf of CEM. He stated "From an environmental perspective, continuous monitoring provides a better picture of process emissions because it is able to detect spikes and trends, whilst also providing emissions data during all process conditions". The article covered topics such as the UK still applying EU regulations, Industrial Emissions Directive (IED), Medium Combustion Plant, Waste Incineration & CEMS Developments.
Recent innovations include the launch of SICK’s MCS200HW which follows international standards such as 2010/75 / EU, EN15267 or EN14181 as well as US EPA, Part 75, for plants requiring a permit. The MCS200HW is a hot/wet extractive multi-component analyser for the continuous monitoring of up to 12 measurement components in the flue gases of industrial combustion plants. It features an innovative 12-inch touchscreen display with a task-oriented operator wizard and quick access to the main functions. Plant operators are also able to quickly access the analyser and its data remotely; wherever they are in the world.
Protea supplies both extractive and in-situ CEMS. The atmosFIR extractive CEMS are built around the company’s FTIR technology, which is MCERTS approved for simultaneous multigas analysis. A standard gas suite of NO, NO2, N2O, SO2, NH3, HCl, CH4, O2, CO2 and H2O is provided, with the lowest range NOx measurement of any FTIR-based CEM. The technology allows further gases to be added easily using the company’s software, without a requirement for further hardware. Protea’s in-situ (IR or UV) CEMS are flange mounted to the emissions point, which removes the need for often costly and high-maintenance sample handling components.
Protea will be launching a comprehensive emissions reporting package for use with their full CEMS product range in 2020. “The provision of the reporting software alongside the full CEM system will ensure a fully configured and compliant emissions package of hardware plus software from us, giving a single supplier and support contact for our customers,” says MD Andy Toy. “Both the CEM and the reporting software are provided with full remote diagnostics capability; which is hugely beneficial at times or in locations when on-site access is not always possible.” Protea’s CEMS are routinely employed by industrial process operators in compliance with their regulatory requirements. However, MD Andy Toy says: “The supply of equipment and services for the monitoring of emissions from marine vessels is a growing part of our business.”
According to the International Maritime Organisation (IMO) MARPOL convention for the prevention of pollution from ships, from 1st January 2020 the sulphur content of fuel oil used by ships shall not exceed 0.50% - which is 80% lower than the previous limit. “This will undoubtedly lower SO2 emissions,” comments Andy Toy. “However, ship operators may not be able to source low sulphur fuels, and fuels may become mixed onboard. In addition, some ships are equipped with emission scrubbers so they should be able to continue to use fuels with higher sulphur content. Our robust, certified monitors enable marine vessels to ensure that they operate their scrubbers effectively and that all vessels are able to demonstrate compliance with emissions regulations.”
The full article can be found at https://www.envirotech-online.com/article/air-monitoring/6/cem/developments-in-the-cems-market/2729.Read More
7th April 2020 - The Complete FTIR Gas Analyser Solution
Protea’s range of Fourier Transform Infrared (FTIR) Gas Analyser allows for the measurement of nearly any gas with one instrument. A FTIR gas analyser collects a full infrared spectrum continuously, allowing for hundreds of gases to be detected and measured at once. Changes are only needed to software calibration files to measure new gases. Protea offers the complete FTIR Gas Analyser solution for a global market place.
Our FTIR gas analysers represent the highest levels of performance and accuracy in industrial and research gas measurements. Protea offers a number of standard FTIR configurations that are designed for specific applications including:-
- Continuous Emissions Monitoring (CEM) FTIR
- Online process FTIR gas analysis
- High concentration FTIR systems
- Very low concentration ppb FTIR analysers
- Portable FTIR gas analysers
3rd April 2020 - Online FTIR & CEMS Solutions Offered
The current pandemic has seen an increased need for remote reporting and management of FTIR and CEMS solutions across the globe.
Solutions for Online process monitoring are available for Nitric Acid Plant Process Control, Siloxanes Analysis, Syngas, TO Multi-Stream Bypass System and Liquid TiCL4 Vanadium Oxychloride Monitoring as well as standard methods for VOC such as FID, Protea’s FTIR gas analysers can provide real-time speciated VOC measurements for hundreds of organic species in process and emissions applications.
More information can be found at www.protea.ltd.uk/online-solutionsRead More
20th March 2020 - UPDATED Coronavirus / COVID-19 Statement 20/03/2020
Following the most recent advice from the Government, Protea have consulted with staff and have made provisions for them to work from home where possible for the foreseeable future. At the moment we expect minimal disruption to our day-to-day operations as a result of the changes. Manufacturing and service within our factories is continuing.
Keeping our team safe and healthy is our highest priority and by rigorously following advice we aim to minimise the effects of Coronavirus on our team, and by implication on our customers and partners, but most importantly the wider community.Read More
10th March 2020 - Global Marine Support Network Expanded
With our marine analysers installed on vessels all over the world, the ongoing service and support for the equipment is satisfied by our dedicated network working in and around major ports and installation locations. Visit www.protea.ltd.uk/marine-support-network for more information.
Protea’s installed base of marine emissions analyser is supported and serviced by our dedicated Marine Support network operating globally. With the full support of our UK-based marine analyser service team, our support network is located in and around the major locations for installation, commissioning and readily available to provide on-vessel service when needed. Protea offer a worldwide service capability to the Marine Industry.
- Annual service of Protea and Procal supplied analysers
- Annual analyser verification and certification Protea and Procal supplied analysers
- Call out service of Protea and Procal supplied analysers
- Ship gaseous emission survey using the latest transportable analysers
All Protea and Distributor service personnel are of the highest professional standard, factory trained and routinely attend refresher courses to ensure that they are up to date with all aspects of the products and legislative requirements.Read More
19th February 2020 - Protea Exhibiting at The Asia Pacific Maritime 30 Sep - 2 Oct 2020
New dates have been announced for the Asia Pacific Maritime 2020 exhibition. Protea Limited are exhibiting at the UK Pavilion Booth number E-K07. The Asia Pacific Maritime (APM) is a premier exhibition and conference in Asia showcasing a complete overview of the vessel sectors, services and solutions, technology, vessels equipment, machinery, supplies, and many more. With 15 editions of proven track record, APM gives you 3 days of opportunities to connect with decision makers and to sharpen industry understanding in Asia. Click here www.apmaritime.com for more information.
Michelle Lim, Managing Director, Reed Exhibitions, said, “APM has been the leading maritime marketplace in Asia for over 15 editions and prides itself on delivering strong business outcomes for exhibitors and visitors. All 15 pavilions at APM as well as major exhibitors have expressed commitment to returning during the new dates (30 September to 2 October 2020) and to working closely with us to deliver an outstanding exhibition once again. We are also glad to have had continued support from Marina Bay Sands, which allowed us to secure the same award-winning venue during the new dates.”Read More
16th January 2020 - New Website Launched
We have recently launched our new website offering a wider range of applications and commercial solutions for emissions monitoring, management and reporting. Protea has been at the forefront of emissions monitoring systems for over 20 years, as both a manufacturer and a user of stack emissions equipment and we continue to provide products and services to a global customer base. The Marine Emissions section is also expanded to provide more information on solutions, products, services and approvals
Protea works with local partners and distributors across the world. We work very closely with our partners to ensure the high quality of service and support is given to you wherever you are. With over 20 years' experience of process and emissions measurements, Protea is a world leader in getting the most from a range of technologies and can measure any gas. The need to demonstrate environmental responsibility is key for today’s marine and offshore industries is a growithing market and one we are very active in.Read More
3rd December 2019 - Season's Greetings From Protea
We would like to take this opportunity to say thank you to everyone involved with our company including customers, staff, suppliers and partners for your support during the year. We are looking forward to 2020 and working with all of you again next year. Season’s greetings from all of us and we wish you a Merry Christmas and a Happy New Year. Our last working day before Christmas will be Tuesday 24th December, We are open on Thursday 2nd January 2020.
We would like to wish our customers & suppliers the best wishes for the festive season. We have had an excellent year and are pleased to be moving into next year with a positive outlook. We have significant expansion plans and projects planned for 2020 and more news will be made available in this area over the first months of the year.Read More
7th November 2019 - Type Approval Certificate For Marine Automatic Devices & Equipment Japan
Protea has attained a further marine emissions approval accreditation to certify that the undernoted product (P2000) has been approved in accordance with the requirements specified in Chapter 1, Part 7 of 'Guidance for the Approval of Materials and Equipment for Marine Use' and the relevant Society's rules.
Nippon Kaiji Kyokai is a ship classification society. It is also known by the brand name “ClassNK” or often in the industry as just “NK”. It is a not for profit society dedicated to ensuring the safety of life and property at sea, and the prevention of pollution of the marine environment. ClassNK offers a broad range of services such as ship classification surveys, statutory surveys and certification on behalf of Flag States based on both international conventions, codes, national statutes, as well as ClassNK’s own rules and regulations.
They also include assessment and certification services of safety management systems of ship management companies as well as the quality systems of ship builders and related manufacturers as an independent third party. ClassNK also offers appraisal, consulting and supervisory services on both marine and non-marine related projects.Read More
17th October 2019 - Protea Exhibiting at CEM India 2019 Conference & Exhibition on Emissions Monitoring
Protea exhibited at the Conference and Exhibition (CEM) on Emissions Monitoring India on 24th to 26th September 2019. Our stand was so busy with existing and new customers. Our Distributor ICE did a fantastic job and thank you to everyone involved and those who visited our stand.
India is one of the world's fastest growing economies, The Central Pollution Control Board (CPCB) of India has taken an important step to adopt Continuous Emissions Monitoring Systems (CEMS) in India. The CPCB has initially directed plants in 17 categories of highly polluting industries to install CEMS for real time monitoring and compliance.Read More
3rd October 2019 - Siloxanes Testing now offered by Protea, providing periodic on-site testing of biogases
Protea can offer periodic on-site testing of Biogas and Biomethane, giving measurement of specific siloxanes, ammonia, VOC as well as bulk CH4/CO2 content of the gas. On-site services include carrying out validation against NPL gas standards, ensuring the siloxanes measurements are traceable (not feasible with manual techniques).
The analyser can be operated on-site by Protea engineers for short-term tests, or rented over larger timescales, with remote access and support from Protea’s UK team. Protea offer consultancy and support on siloxanes removal processes, with multiple sample point test plans used to optimise abatement. Please Contact Us for more information.Read More
4th September 2019 - Protea P2000 Product Focus
The Protea P2000 is an infra-red (IR), duct or stack-mounted Analyser, designed to provide In-Situ analysis of up to six gas-phase emission components.A typical system comprises of a stack mounted Analyser, an integral Calibration Module and a Control Unit with options which include a powerful In-Situ Heater anda stand-alone Analysis Software package. MCERTS Product Conformity Certificate is also available with the P2000 Series Continuous Emission Monitor With Protea Control Unit.
The P2000 uses the reflective beam principal to directly measure process gas as it enters the in situ sample cell. Unlike higher maintenance extractive systems, Protea’s patented, sintered metal technology removes the need for gas filtering or sample conditioning.The P2000 analyser requires very little maintenance and achieves a class-beating availability of over 98% in demanding applications.The Control Unit can support multiple analysers from the Protea range.Read More
9th August 2019 - Free Spectrum Viewer Software Update
Protea have released a newly updated version of our Spectrum Viewer software. This allows for a wider spectral format use, in particular the ability to work with the NIST standard library spectra for Mass Spectrum. The flexible and user-friendly Spectrum Viewer can now be used for peak analysis and spectral manipulations for mass spectra data, as well as the IR absorption use. The software is still freely downloadable from the Protea website – we welcome feedback and updates from users!Read More
7th August 2019 - Global Distributors Updated for 2019
We have recently updated our global distributors list which now includes distribution across 38 countries in all 6 continents. Each distributor works closely with Protea allowing for support across our CEMS and Emissions ranges. More recently we have implemented complete global distribution for Marine Process and Emissions applications.
Protea works with local partners and distributors across the world. We work very closely with our partners to ensure the high quality of service and support is given to you wherever you are. Protea are always looking to expand our distributor network to bring new channel partners on-board as re-sellers or systems integrators for our products into more markets and applications.Read More
1st July 2019 - Protea Visit the OGM Exhibition in Kuala Lumpur to Undertake Sales & Service Training
Members of the Protea team visited Kuala Lumpur where we exhibited our full range of products in conjunction with a local distributor for the region Exact. Sales and service training for engineers was undertaken along with a number of in-depth knowledge transfer sessions for our core product ranges including the P2000 In-Situ Infra-red gas analyser connected to a Protea control unit offering a complete continuous emission monitoring system.
24th May 2019 - atmosFIR FTIR Pattern Approval Certificate of the People’s Republic of China
The atmosFIR range of FTIR multigas analysers, for fixed emissions, portable emissions and process analysis, have been awarded pattern approval. This demonstrates Protea’s analysers have successfully passed technical and metrological tests and is permitted for use. This demonstrates Protea’s commitment to product development and supporting our partners in the People’s Republic of China.
10th May 2019 - MCERTS Certified Advanced FTIR Automated Measuring Systems (AMS)
Protea Ltd based in the UK are leaders in the development and application of FTIR in Continuous Emission Monitoring Systems (CEMS). Protea, a pioneer in the application of FTIR in emissions testing, introducing the versatile MCERTS approved Protea 204M in 2008.
Protea are pleased to announce the launch of an MCERTS approved range of Emission Monitoring Systems. The atmosFIR range has been certified under MCERTS to EN 15267 – Type Approval & Certification of AMS (QAL1) suitable for monitoring European Union Directives for example 2010/75/EC, 2000/76/EC, 2001/80/EC and quality assurance in accordance with EN 14181. Uniquely we are the only FTIR supplier on the market to offer an embedded certified O2 sensor and also have the lowest certified range of NO.
The certificate can be downloaded here
atmosFIR Range – MCERTS QAL1 Fixed installation
Protea manufacture fully integrated systems to monitor many demanding industrial applications for such as Waste to Energy, Cement, Power and many more. The system can be supplied in a variety of configurations to meet the customers’ requirements, including, ATEX approved, weather proofing for outdoor installation, Air Conditioning.
Protea will supply the system to meet the customer’s specification in addition to monitoring the gas emission concentrations will also monitor particulate, stack pressure, stack temperature and flow reporting all concentrations as required by the emission permit on a certified CEMS DAS.
Protea can also supply the integrated CEMS system in bespoke walk in shelters with all the necessary system components including heated lines, sample probes and certified calibration gases.
atmosFIR Range –Transportable FTIR for Back-up, AST and compliance testing
Protea have replaced the Protea 204M with the atmosFIRt utilising the same technology as used in the fixed configuration the versatile transportable analyser is ideal for source testing. The analyser, with its intuitive HMI software and logging, is a robust simple to use solution to many portable emissions applications. Not only for standard combustion gas analysis – CO, NOx, SO2, HCl, NH3 – but also for complex organic emissions with no limit on the number of VOCs that can be measured. The transportable FTIR comes with built in Oxygen sensor and sampling system control.
atmosFIR Range – MCERTS QAL 1 19” Rack Mounted
Protea can supply the 19” Rack Mounted analyser to be integrated into third party systems, however to comply with the approval strict adherence to the sample system is required – refer to factory.
The atmosFIR series can monitor over 200 gas species simultaneously; the following are those certified under MCERTS EN 14181. Certificate Number Sira MC190346/00:
Protea P2000 - In addition to the atmosFIR range Protea also manufacture a range of MCERTS certified multi component In-Situ analysers. Certificate Number Sira MC050060/13Read More
6th March 2019 - New Marine Emissions Brochure Now Available
We have recently updated our Marine Emissions download focused on meeting the environmental challenges faced for global shipping and logistics activities. The most important gases in terms of emissions are currently sulphur oxides (SOx), and nitrogen oxides (NOx). Annex VI has a schedule for significant reductions in both over the next 10 years. Please contact us for your Marine Emissions requirements.
The need to demonstrate environmental responsibility is key for today’s marine and offshore industries. Charterers and the public demand high standards of performance and reliability. Fuels and exhaust gas emissions are also the subject of international, regional and national controls. The most significant is IMO MARPOL Annex VI - Regulations for the Prevention of Air Pollution from Ships, which also applies to mobile offshore drilling units and other oil industry platforms.Read More
6th February 2019 - Download Our Latest Company Overview PDF
The last two years have seen major developments at Protea across all areas of the business. This includes the opening of new manufacturing facilities, new product development and also the employment of additional expertise supporting Protea being specialists in design, manufacture and supply of integrated Continuous Emission Monitoring and Process Analyser systems for all types of industrial application.
Protea utilises its own unique advanced technologies to meet customer requirements.The Company offers exceptional sales and after sales support to its customers through a highly trained and motivated world-wide distributor network.Read More
11th January 2019 - Global Marine Emissions in the Spotlight
The need to demonstrate environmental responsibility is key for today’s marine and offshore industries. Charterers and the public demand high standards of performance and reliability. Fuels and exhaust gas emissions are also the subject of international, regional and national controls. The most significant is IMO MARPOL Annex VI - Regulations for the Prevention of Air Pollution from Ships, which also applies to mobile offshore drilling units and other oil industry platforms.
The Emissions Monitoring Solution from Protea is the P2000 emissions monitoring system is approved for the analysis of exhaust gases from the engines and boilers of ships and offshore rigs. Robust and with proven reliability, up to six gases can be measured including SO2, CO2 and NOx.
The Protea 2000 emissions monitoring system comprises up to 6 exhaust mounted analysers, each with automatic verification facilities. Emissions data from the entire system is securely managed and displayed at a dedicated Classification Society approved panel PC, with outputs to networks, control systems, and reporting facilities.Read More
4th December 2018 - Season's Greetings From Protea
We would like to take this opportunity to say a thank you to everyone involved with our company including customers, staff, suppliers and partners for your support during the year. We are looking forward to 2019 and working with all of you again next year. Season’s greetings from all of us and we wish you a Merry Christmas and a Happy New Year.
We have had an excellent year and are pleased to be moving into the next year with a positive outlook. We have significant expansion plans and projects planned for 2019 and more news will be made available in this area over the first months of the year.Read More
29th November 2018 - AQE / WWEM 2018 From Dirty Diesel to Clean Carbon Dioxide & Biogas
Following on from the Quality and Environment exhibition and the Water, Waste Water and Environmental Monitoring show on the 21st and 22nd of November, Protea have appeared in an online article focused on “dirty diesel to clean carbon dioxide and biogas”. The full article can be seen by clicking the image below and there is more information also available below the image from the article.
To monitor and control this potential issue, measurement of siloxanes in a matrix of biogas can be achieved using FTIR instrumentation. Victoria Brewster, Product Leader for Spectroscopic Solutions at Protea commented to gasworld on the analyser that her company offers for this application:
“Protea used to operate a UKAS accredited stack emissions testing laboratory as well as manufacturing analysers. But, we were never really satisfied with the instrumentation that was commercially available for some of the more exotic challenges that this sector presented to us. So, we began to innovate our own instrumentation and data analysis software. Over the years, this has evolved to the highly sophisticated and robust solutions that we have brought to the AQE this year, including our atmosFIR, which is ideally suited to sub-ppm level siloxanes analysis in the biogas sector,” said Brewster.Read More
27th November 2018 - Environmental Times Air Quality Case Study & Product Book Article
The highest levels of performance and accuracy in environmental emissions monitoring equipment. With 20 years experience in gas analyser application and manufacture, Protea can provide the complete gas analysis solution for research, process and environmental emissions monitoring.
- Protea is the leading UK manufacturer of FTIR emissions monitoring analysers
- New Peterborough Factory for 2018, with increased production and calibration facilities for our in-situ product range
Wide Product Range
- We supply portable/transportable analysers for stack emissions testing
- P-AMS for stack emissions testing (P204M and atmosFIRt), with software support for CEN and TGN M22 FTIR emissions standards
- Complete stack emissions equipment supply – heated lines, heated probes, filters etc
- We supply Continuous Emissions Monitoring Systems (CEMS) for in-situ and extractive monitoring using IR and UV technology
- Fixed monitoring applications such as incineration, but also multiple VOC, CFC, HFC and a wide range of other emissions
- Continuous process monitoring systems also provided, from ppb to %Vol level measurements.
- P2000 In-Situ CEM MCERTS approved and wide installation base
- Our ProtIR 204M product is MCERTS approved as a transportable CEM
- New atmosFIR CEM product has “MCERTS applied for” status and is being tested now
New! In-Situ CEM Product Range
The unique in-situ CEM systems (Both Infra-Red and Ultra Violet) are flange mounted, with the Insitu sample cell protruding into the stack. The Protea In-Situ multi component CEM can monitor multiple gases species simultaneously, because the water vapour is monitored the pollutant gases can be reported on a wet or dry bases depending on the local environmental agencies requirements.
- We offer comprehensive training in the UK
- Training can be provided by MCERTS-standard emissions testing professionals for both instrumental and manual emissions testing
- Dedicated FTIR Applications Training can be provided for any FTIR manufacturer’s equipment
21st November 2018 - Protea Exhibiting at AQE 2018 Telford International Centre
Protea will be exhibiting at the Air Quality and Emissions Show (November 21st & 22nd - 2018) AQE 2018 on Stand 8. The 10th in the series of Air Quality & Emissions Events will focus on industrial air emissions and stack monitoring of (Part A) processes regulated by the Regulators of the United Kingdom and Northern Ireland, ambient air quality monitoring, the emissions to air of Part A2 and Part B processes controlled by local authorities and SEPA, MCERTS standards and all aspects of air quality monitoring, protection and treatment.
In 2018 the AQE show will now run alongside WWEM (The 8th International Conference and exhibition on Water, Wastewater and Environmental Monitoring). Visitors to AQE and WWEM will be able enter both these complementary events free of charge and will now benefit from attending two shows at one time under one roof showing a full range of products and services for air and water monitoring. Visitors to both shows will be Environmental managers, Process Operators, Local Authorities, Regulators , Consultancies and Scientists from across all industries.Read More
1st November 2018 - Inside Our New Modern Manufacturing Facility at Peterborough
Earlier in the year we relocated our offices in Peterborough to a new location which included a complete fit out to allow for a purpose built modern manufacturing facility. The images below provide an insight into the work that we do focused on the manufacture and production of in-situ gas analysers for a global market place. The new facility specialised in the production of the P2000 and P5000 in-situ Continuous Emissions Monitoring (CEM) analysers that are flange mounted to the emissions point, with an in-situ sample cell inserted into a stack.
Our full office address for the new location is Protea Ltd, Peterborough, Unit 2 Venture Park, Stirling Way, Peterborough, Cambridgeshire, PE3 8YD, UK. The telephone number is +44 (0) 1733 263437 and the email address is mailto:firstname.lastname@example.org. Protea offers both Infra-Red (IR) and Ultra Violet (UV) in-situ gas analysers. The in-situ CEM systems are multi-component and can monitor multiple gases species simultaneously. The analyser also monitors water vapour and so the pollutant gases can be reported on a wet or dry bases depending on the local environmental agencies requirements.Read More
3rd October 2018 - Accreditations Page Updated with all Certificates
Protea have had a busy year during 2018 with the addition of new standards and accreditations. We have been very active in this area and have a dedicated area where you can access all six of our downloads offering detailed information on a wide range of accreditations relating to Protea and its products.
Our full range of accreditations and certificates is presented below:
- Protea Quality Policy - Protea is certified to the internationally recognised ISO 9001:2015 quality management system for its system design, manufacturing, supply and service activities
- Protea ISO 9001:2015 Certificate - The design, manufacture, supply and service of analysers for gas emissions, process control and research
- RINA Marine Certificate For The P2000 CEMS - The P2000 may be used for the continuous monitoring of emissions from the exhaust gas cleaning system
- Protea ATEX Quality Assurance Notification - Equipment or Protective Systems or Components Intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU
- P2000 Analyser ATEX Type Examination Certificate - Equipment or Protective Systems or Components Intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU
- Protea IECEx Certificate of Conformity - International Electrotechnical Commission IEC Certificate Scheme for Explosive Atmospheres
- P2000 Lloyds Register Type Approval Certificate Extension - This is to certify that Certificate No. 15/ 00083 for the undernoted products is extended and renumbered as shown
3rd September 2018 - Protea Achieve IECEx Certificate of Conformity
International Electrotechnical Commission IEC Certificate Scheme for Explosive Atmospheres. IECEx is a voluntary system which provides an internationally accepted means of proving compliance with IEC standards. IEC standards are used in many national approval schemes and as such, IECEx certification can be used to support national compliance, negating the need in most cases for additional testing. Download the Protea IECEx Certificate of Conformity here or on our accreditations page.
The International Electrotechnical Commission(IEC) is an international standards organisation that prepares and publishes International Standards for all electrical, electronic and related technologies - collectively known as "electrotechnology". IEC standards cover a vast range of technologies from power generation, transmission and distribution to home appliances and office equipment, semiconductors, fibre optics, batteries, solar energy, nanotechnology and marine energy as well as many others. The IEC also manages three global conformity assessment systems that certify whether equipment, system or components conform to its International Standards. If you require any further information regarding the Protea IECEx Certificate of Conformity or anything else you can email Protea at email@example.comRead More
8th August 2018 - Protea Attain ATEX Quality Assurance Notification
We are pleased to announce that Protea have attained an ATEX directive for Equipment or Protective Systems or Components Intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU. Notification Number: Baseefa ATEX 7765. ATEX is a legal prerequisite for selling within the European Economic Area, but IECEx gives maximum international acceptance and, if feasible, most customers elect to have certificates for both schemes issued at the same time. Download the Protea ATEX Quality Assurance Notification here.Read More
11th June 2018 - Protea will be Exhibiting at Achema 2018 for the Week 11 – 15 June
Protea will be exhibiting at Achema 2018 for the week 11 – 15 June. Achema is the world forum for the chemical engineering and process industries. Visit us in Hall 11.1, Booth E57, where we will be demonstrating our range of extractive and in-situ process and emissions gas analysers.
ACHEMA is the World forum for chemical engineering and the process industry, Innovations' platform and technology summit, Trend-setting meeting point, Take-off for investment decisions and the International network of experts and executives. General topics at ACHEMA include Chemical and biochemical Reaction Technology, Chemical Engineering, Mixing and Separation Technology, Pharmaceutical Technology, Laboratory Technology, Materials and Material Processing, Energy and alternative Feedstocks and Labour and Process Safety.Read More
1st June 2018 - Protea Awarded the RINA Marine Certificate for the P2000 CEMS
Protea have recently been awarded the RINA Certificate Marine Certificate for our Monitoring and control system continuous emissions monitor the P2000. The P2000 may be used for the continuous monitoring of emissions from the exhaust gas cleaning system. The actual reference standard is that the RINA rules for the classification of ships - Part C “Machinery, Systems and Fire Protection”, Chapter 3, Section 6, Tab.1 and IMO Res, MEPC.259(68) Chapter 6 “Emission Testing” as well as the relevant requirements of Revised MARPOL Annex VI and NOx Technical Code 2008.
Protea 2000 In-Situ Infra-red gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS). The Stack Mounted In-Situ analyser monitors the stack gas without the need for any sample handling equipment making it a cost-effective solution to Continuous Emission Monitoring and Process applications. The analyser monitors the stack gases “wet”, water vapour is continuously monitored enabling the pollutant gases can be reported on a wet or dry bases.Read More
22nd May 2018 - DEFRA Publish a Draft Clean Air Strategy for the UK
Last year DEFRA published plans for reducing roadside nitrogen dioxide concentrations in the UK, setting out our approach to meeting the statutory limits for NO2. On 22nd May 2018 DEFRA published its draft for a Clean Air Strategy outlining their ambitions relating to reducing air pollution in the round, making our air healthier to breathe, protecting nature and boosting the economy. In this draft strategy, DEFRA set a clear direction for future air quality policies and goals. The strategy sits alongside three other important UK government strategies: UK Industrial Strategy, UK Clean Growth Strategy and the UK 25 Year Environment Plan. It can be downloaded here or viewed below.
The draft Clean Air Strategy 2018 sets out actions to improve air quality by reducing pollution from a wide range of sources. It affects a broad range of sectors and touches on the interests of many. DEFRA would like views on the actions being proposed to reduce air pollution and its effects, and to hear whether individuals, companies and organisations have any further suggestions. We will await the next stages of this important initiative.Read More
16th May 2018 - Protea Exhibited at CEM Budapest 2018
The International Conference and Exhibition on emissions monitoring (CEM) took place in Budapest, Hungary from 16th-18th May 2018. Protea were in attendance at the event presenting there CEM solutions to a global audience. The CEM 2018 exhibition focused on a number of Conference topics including Emission regulation and future monitoring challenges, Standards and Quality, Dust measurement at low concentrations, Gaseous species at low concentrations (HCl, HF, NH3, SO3, CH4, N2O, CHOH, TOC), Mercury and Trace Metals, Fence line monitoring & measurement of fugitive/diffuse emissions, Innovative Measurement Technology & Industrial Case Studies (Power industry, Cement industry, Metal industry, Chemical Industry, Glass industry).
The 13th International Conference and Exhibition on Emissions Monitoring will be of interest and value to Process Operators, Environmental Managers, Regulators and Consultants. Topics featured at the Conference and exhibition will include: International regulation and Policy, Standards, quality control, monitoring techniques and industrial case studies.Read More
14th May 2018 - Protea Open a Second New Manufacturing Facility in the UK
As part of our expansion plans into future years we are pleased to announce that our new manufacturing facility is now fully operational. The new facility is located in Peterborough and will focus on the design, manufacture and supply of in-situ continuous emissions monitoring analysers to a global market place.
The new location address can be found at:
Unit 2 Venture Park,
20th April 2018 - Protea Training System Solutions Enhanced
FTIR Operation - Either to be provided with one of our own FTIR gas analyser systems, or provided to users of other FTIR equipment, Protea’s FTIR training course provides an in-depth and thorough training course for both the new comer to FTIR and also the experienced user. From an overview of spectral theory, to a breakdown of the components within an FTIR analysis system, our training courses enable the laboratory user or plant engineer to get the most out of this powerful technology.
FTIR Data Analysis - The beauty of FTIR spectroscopy for industrial gas analysis is the collection of spectral data that can be reviewed and re-analysed offline to provide extra information on gas species within the process. However the tools and techniques to do this are not always fully explained or demonstrated to newcomers to this technology. Protea can provide 2 day training courses specifically for the analysis of FTIR data. Starting with a review of data quality and spectral care, the course introduces the customer to the concepts of FTIR spectral analysis such as chemo metrics.Read More
5th February 2018 - New State Of The Art Manufacturing Facility for Protea Underway
Protea is excited to announce our comprehensive building works are well underway on our new premises in Peterborough. The customisation of the 10,0000 square foot facility will enable the high production rate of emissions monitoring systems predicted for 2018 to be met, with the increased capacity as Protea continues to expanded. Further updates on the new location and the opening ceremony will follow in the coming months.
The year has already started well with the successfully accreditation to QAL 1, EN14181 MCERTS for the P2000 multi component in-situ continuous emission monitoring system. This will enable us to meet our customers’ requirements both in Europe and the increasing number of countries adopting the requirements of this certification. Whereas there are several instruments with this certification we are one of few that can offer in-situ fully verifiable analysers with this accreditation. The P2000 analyser is unique with its capability of monitoring the common pollutant gases at these levels in varied applications and specifications. With our powerful reporting software makes our solution second to none.Read More
19th January 2018 - MCERTS Accreditation for Protea
We are pleased to announce that our Protea 2000 In-Situ Infra-red gas analyser is now accredited for MCERTS standard. This accreditation is tested to a European standard (15267-3) which is globally recognised. The new approval allows for Protea to offer and supply the P2000 Series Continuous Emission Monitor with Protea Control Unit.
Monitoring emissions to air, land and water (MCERTS) is a business emissions to air, land and water are regulated under strict European and UK laws, to protect the environment and human health. Businesses either monitor their emissions all the time, known as continuous monitoring, or at times defined in their permit, known as spot tests or periodic monitoring. In both cases they must meet quality requirements. MCERTS is the Environment Agency’s Monitoring Certification Scheme. It provides the framework for businesses to meet our quality requirements. As we now comply with MCERTS we can have confidence in the monitoring of emissions to the environment.Read More
1st December 2017 - Season’s Greetings from Protea
We would like to take this opportunity to say a thank you to everyone involved with our company including customers, staff, suppliers and partners for your support during the year. We are looking forward to 2018 and working with all of you again next year. Season’s greetings from all of us and we wish you a Merry Christmas and a Happy New Year.
We have had an excellent year over the last 12 months and are pleased to be moving into the next year with a strong order book. We have significant expansion plans and projects planned for 2018 and more news will be made available in this area over the first months of the year.Read More
29th November 2017 - Protea Exhibiting at Peftec Antwerp in Belgium
Protea will be exhibiting at the Peftec exhibition in Antwerp, Belgium on 29th & 30th of November 2017. PEFTEC is a focused international conference and exhibition for Analytical Chemists, Scientists, Process Operators, Laboratory Personnel and Environmental Managers who work in around the Petroleum, Refining, Chemical and Petrochemical industries. PEFTEC will take place on 29th & 30th of November 2017 in Antwerp, Belgium.
PEFTEC features a high level conference programme, over 80 free to attend technical seminars and an exhibition represented by over 250 Instrument and Service providers. Topics and products featured at PEFTEC 2017 will include: Laboratory testing and measurement, Petrochemical Analysis, Emissions Monitoring in air, water and soil, portable and field sampling, reference materials, oil analysis, calibration, International & Industrial Regulation, standards, Quality Assurance, Measurement Techniques & Technologies.Read More
4th October 2017 - In Situ Gas Analysers Range Launched - the Protea 2000 & 5000
As part of our growth plans Protea is please to launch a new range of products and technologies focused on Continuous Emission Monitoring System (CEMS). The Stack Mounted In-Situ analyser monitors the stack gas without the need for any sample handling equipment making it a cost effective solution to Continuous Emission Monitoring and Process applications. The analyser monitors the stack gases “wet”, water vapour is continuously monitored enabling the pollutant gases can be reported on a wet or dry bases.
The range includes two models at the stage the Protea 2000 and the Protea 5000. The Protea 2000 can monitor up to six gas species, including NO, NO2, N2O, SO2, NH3, HCl, CH4, CO, CO2 and H2O in many CEMs and process applications. The Protea 5000 can monitor to multiple gas species, including NO, NO2, N2O, SO2, NH3, TRS, H2S and H2O in many CEMs and process applications. The analyser probe is heated, ensuring components in contact with the stack gas are above the dew point, enabling the analyser to be installed on highly corrosive applications such as Nitric Acid and Sulphuric Acid plants. The analyser is compliant with international standards such as US EPA 40 cfr Part 60 & 75.Read More
6th September 2017 - Protea Ltd Adds In-Situ Continuous Emission Monitoring to its Product Range
Protea Ltd acquire the sole rights to manufacture the Parker Procal range of In-Situ Continuous Emission Monitoring (CEMS) and Process analysers from Parker Hannifin. The range of In-Situ analysers are considered to be number one in the field of CEMS with a large installed base in demanding applications globally. The In-Situ analysers will compliment Protea’s existing extensive product range, enabling the company to develop its application capability in all key industrial sectors. Click the image below to download this news press release.
Protea Ltd design and manufacture a range of advanced Fourier-Transform Infra-Red (FTIR), Tuneable Laser Diode (TDL) and Quadrupole Mass Spectrometer (QMS) instruments. The systems are supplied for both CEMS and Process applications, capable of monitoring low level emissions compliant with international standards (European EN14181 and US EPA).
The Company will manufacture the In-Situ product range in a new facility in Peterborough UK and has recruited a team with extensive experience of In-Situ CEMS technology. Protea Ltd Managing Director Andrew Toy “I am pleased to announce the inclusion of the Procal In-Situ range of analysers and accessories into our product portfolio, enabling Protea to considerably expand its capabilities. We are now able to offer fully integrated Continuous Emission Monitoring Systems to meet the ever demanding market requirements.”
The company will utilise its extensive highly experienced distributor network to market and support both its existing and the newly acquired In-Situ range of gas analysers as it continues to develop its capabilities in the growing international environmental monitoring sector.
About Parker Hannifin - Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For 100 years the company has engineered the success of its customers in a wide range of diversified industrial and aerospace markets. Learn more at www.parker.comRead More
4th September 2017 - Protea Exhibiting at CEM India 2017 Conference & Exhibition on Emissions Monitoring
Protea will be exhibiting at the Conference and Exhibition (CEM) on Emissions Monitoring India on 26th to 28th September 2017 at stand 26. India is one of the world's fastest growing economies and is currently the third largest polluting country in the world emitting 2407 million metric tonnes of CO2 .To tackle this pollution The Central Pollution Control Board (CPCB) of India has taken an important step to adopt Continuous Emissions Monitoring Systems (CEMS) in India. The CPCB has initially directed plants in 17 categories of highly polluting industries to install CEMS for real time monitoring and compliance.
The CEM India conference follows on from the highly successful series of CEM events which have been held in Europe since 1997. CEM India will provide delegates and visitors in depth information on Indian regulation and policy, monitoring guide lines, calibration and quality control. There will be case study presentations from International speakers, The Central Pollution Control Board and the Centre for Science and Environment on best practice, installation, procedures and data capture.Read More
1st September 2017 - Global Distributors Announced In Five Continents
The last twelve months has seen significant growth within Protea for both home and export market sectors. We have seen expansion and growth in our product range, human resources and also our quality systems. This follows on from an expansion into larger premises and the acquisition by the Bartec Auto ID group of companies. We have also invested in the development and expansion of a network of global distributors across key markets within our industry sectors.
We now have distributors in Austria, Australia, Bahrain, Belgium, Netherlands, China, Denmark, Eire, Estonia, Finland, France, Greece, Netherlands, India, Iran, Israel, Italy, Laos, Lithuania, Malaysia, Norway, Philippines, Qatar, Romania, South Africa, South Korea, Spain, Sweden, Thailand, Turkey, USA, Vietnam, Indonesia and Singapore. If you are in a territory that we do not have representation in then we are interested in hearing from you.Read More
18th August 2017 - Protea Awarded ISO 9001:2015 Accreditation
Protea is pleased to announce that we have had our Integrated Management System (IMS) successfully audited by TÜV Rheinland and have been awarded certification to ISO 9001:2015 for the design, manufacture, supply and service of analysers for gas emissions, process control and research.
Protea Ltd are the sole UK manufacturer of FTIR’s and our certification to ISO 9001:2015 further enhances our commitment to manufacturing and delivering high quality products and services. This commitment to quality is in addition to our ongoing EN 15267-3 certification tests for MCERTS approval of our atmosFIR CEM which we anticipate to be completed later this year.Read More
24th July 2017 - Sales Team Expansion for Global Protea Solutions
Protea exhibited at the Air Quality and Emissions Show in Telford on May 24th to 25th at stand numbers 13 & 14. This was the 9th Air Quality & Emissions exhibition and focused on industrial emissions and stack monitoringProtea are pleased to announce the appointment of two new business development representatives covering global territories for all products in the Protea range. This will cover responsibility the for developing sales growth internationally, the recruitment and management of a worldwide distributor network and the supporting customers and end users directly. Making regular worldwide visits to assist and support, promote, specify applications for a range of emission monitoring products, this new team will look to develop a clear action and growth plan through exhibitions, seminars and marketing support. They will also provide commercial and application training and obtain certification, vendor approvals working with large OEM customers. We welcome Chris Daw and Karen Canham to Protea.
Chris Daw has long experience in bringing high tech, high value products from concept to market, particularly in the export field. In the 35 years that he has been in industry and sales, he has always gone the extra mile for customers, and been really effective in new business development in numerous new territories. We see Chris being a real asset to Protea and he can be contacted on Chris.Daw@protea.ltd.uk
Karen Canham has vast experience in technical and high value sales development and Support for Small & Medium Sized Enterprises (SMEs) and Medium Sized Businesses (MSBs). A history of worldwide growth with a network of associates in key geographical hubs that can assist in developing sales strategy’s and routes to market. Karen is available to help you with all applications and can assist you and potential clients by co-ordinating and management of sales initiatives. Karen is an exceptional communicator when dealing with your specifications and she can be contacted on :Karen.Canham@protea.ltd.ukRead More
14th June 2017 - The Air Quality & Emissions Show Gallery
Protea exhibited at the Air Quality and Emissions Show in Telford on May 24th to 25th at stand numbers 13 & 14. This was the 9th Air Quality & Emissions exhibition and focused on industrial emissions and stack monitoring.
Products on display at our stand included the atmosFIR Multigas Emissions Analyser, the atmosFIR CEM and the ProMass system. Through the commercialisation and deployment of new technologies, Protea Ltd delivers customer-focused solutions for process, emission and environmental monitoring needs. With an in-depth knowledge of measurement technologies, system integration and turn-key system engineering and software optimisation; Protea can provide the solution to process and emissions control.Read More
24th May 2017 - The Air Quality & Emissions Show (May 24th & 25th - 2017) in Telford
Protea will be presenting at the Air Quality and Emissions Show in Telford on May 24th to 25th at stand numbers 13 & 14. The 9th in the series of Air Quality & Emissions Events will focus on industrial emissions and stack monitoring of (Part A) processes regulated by the Regulators of the United Kingdom and North Ireland, ambient air quality monitoring, the emissions to air of Part A2 and Part B processes controlled by local authorities and SEPA, MCERTS standards, aspects of air quality protection and treatment.
Products on display at the Air Quality & Emissions Show include the atmosFIR Multigas Emissions Analyser, the atmosFIR CEM and the ProMass system. Through the commercialisation and deployment of new technologies, Protea Ltd delivers customer-focused solutions for process, emission and environmental monitoring needs. With an in-depth knowledge of measurement technologies, system integration and turn-key system engineering and software optimisation; Protea can provide the solution to process and emissions control.Read More